1. Sample Safety Program For Construction
2. Construction Safety And Health Book
3. Dole Construction Safety And Health Program Sample Pdf

4.1.3 Construction Safety and Health Officer/s from Subcontractors (any employee/worker trained and, in addition to their regular duties and responsibilities tasked by his employer to implement occupational safety and health program in accordance with the provisions of the OSH Standard. Please attach certificate of training/s prescribed by DOLE). COMPREHENSIVE HEALTH and SAFETY PROGRAM FOR CONSTRUCTION For Compliance With Wyoming Construction Rules & Regulations. This sample plan is provided only as a guide to assist in complying with Wyoming Occupational Health and Safety's Construction Rules. The following sample safety and health programs are intended to provide examples of written programs on various workplace safety and health topics. They are not intended to supersede the requirements in OSHA standards. Employers should consult the applicable OSHA standards for the specific.

• Norah Bond
• 3 years ago
• Views:

Transcription

1 PROCEDURAL GUIDELINES Department Order No. 13, series of 1998, otherwise known as THE GUIDELINES GOVERNING OCCUPATIONAL SAFETY AND HEALTH IN THE CONSTRUCTION INDUSTRY Department of Labor and Employment Bureau of Working Conditions Intramuros, Manila i

2 PROCEDURAL GUIDELINES Department Order No. 13, series of 1998, otherwise known as THE GUIDELINES GOVERNING OCCUPATIONAL SAFETY AND HEALTH IN THE CONSTRUCTION INDUSTRY TABLE OF CONTENTS A. OBJECTIVES B. LEGAL BASES: PAGE NO. 1 1 C. AGENCIES INVOLVED IN CONSTRUCTION HEALTH AND SAFETY LAWS AND RELATED ISSUANCES : 1. Department of Labor and Employment a. Bureau of Working Conditions (BWC) b. DOLE-Regional Offices c. Employees Compensation Commission (ECC) d. Occupational Safety and Health Center (OSHC) e. Technical Education Skills Development Authority (TESDA) 2. Department of Trade and Industry a. Construction Industry Authority of the Philippines (CIAP) b. Construction Manpower Development Foundation (CMDF) c. Philippine Contractors Accreditation Board (PCAB) 3. Department of Health (DOH) - The Non-Communicable Diseases Control Office Department of Public Works and Highways (DPWH) Office of the Building Official. 5. Department of Interior and Local Government(DPWH) - Bureau of Fire Protection Department of Environment and Natural Resources(DENR) Construction Industry Tripartite Council(CITC) D. DEFINITION OF TERMS: E. COVERAGE ii

Sample Safety Program For Construction

3 TABLE OF CONTENTS PAGE NO. F. DEPARTMENT ORDER NO. 13, REQUIREMENTS: 1. Construction Safety and Health Program pursuant to Section 5, D.O. 13, series of Company Safety and Health Policy Specific Construction Safety and Health Program Composition of Construction Safety and Health Committee Safety and Health Personnel Specific Duties and Responsibilities of the Safety Officer Applicable In-plant Safety and Health Promotion and Continuing Information Dissemination Accident and Incident Investigation, Recording and Reporting Provisions for the Protection of the General Public Within the Vicinity of the Company Premises During Construction and Demolition General Safety Within Construction Premises Environmental Control (Rule 1070 of the Standards) Guarding of Hazardous Machinery (Rule 1200 of the Standards) Provisions For and Use of Personal Protective Equipment (PPE) - (Rule 1080 of the Standards) Handling of Hazardous Substances (Rule 1090 of the Standards) General Materials Handling and Storage Procedures. (Rule 1150 of the Standards) Installation, Use and Dismantling of Hoist and Elevators.-Rule Testing and Examination of Lifting Appliance, Rule 1220 Elevators and Related Equipment iii

4 TABLE OF CONTENT 1.16 Testing and Inspection of Electrical and Mechanical Facilities and Equipment Workers Skills and Certification Provisions for Emergency Transportation Facilities for Workers Fire Protection Facilities and Equipment First-Aid and Health Care Medicines, Equipment and Facilities Workers Welfare Facilities Proposed Hours of Work and Rest and Rest Breaks Waste Disposal Disaster and Emergency Preparedness Contingency Safety Program Company Penalties/Sanctions for Violation/s of the Provision/s of Safety and Health Program Personal Protective Equipment by Type of Project PAGE NO General Building Construction Project (GBC). 2.2 General Engineering Construction Project. 2.3 Specialty Construction Project 3. Safety and Health Personnel and Skilled Worker Minimum Required Safety Personnel 3.2 Qualification and Training of Safety and Health Personnel and Skilled Workers. 4. Construction Heavy Equipment Signages and Barricades Signage Procedures: 5.2 Posting 5.3 Barricading Procedures: 5.4 Installing of barricades iv

5 TABLE OF CONTENT PAGE NO. 6. Construction Safety and Health Committee Composition 6.2 Duties and responsibilities 7. Construction Safety and Health Reports Cost of Construction Safety and Health Program Safety and Health Information Welfare Facilities G. PROCEDURES IN THE FILING AND PROCESSING OF CONSTRUCTION SAFETY AND HEALTH PROGRAM (CSHP) 1. Where to File Evaluation of Construction Safety and Health Program A. General Requirements 1. Requirements for Submission Project Description B. Procedures in Processing and Evaluation Evaluation 2. Results of Evaluation 3. Inspection and Monitoring H. VIOLATION AND PENALTIES LIST OF ANNEXES Annex PPE1- Classification of construction works/activities for purposes of.. determination of mandatory minimum Personal Protective Equipment(PPE) requirements Annex CHE -1 - Crane Inspection Checklist v

6

7 Pursuant to Department Order No. 13 series of 1998, otherwise known as the Guidelines Governing Occupational Safety and Health in the Construction Industry and other Related Laws and Issuances, this Procedural Guidelines shall apply in the filing, processing and evaluation of Construction and Health and Safety Program (CHSP) and other Related Activities and/or Operations in all construction worksites and workplaces and appropriate sanctions in cases of violations thereof. A. OBJECTIVES This Guidelines aims to: 1. Harmonize D.O. 13 with other existing standards and laws related to safety and health particularly in the construction activities and operations in all worksites and workplaces. 2. Provide stakeholders with clear and complete guide in order to comply with the requirements of D.O. No. 13 including the relevant rules of the Occupational Safety and Health Standards. 3. Standardize the procedures in the filing and processing of applications of Construction Safety and Health Program. 4. Strengthen linkages with other government and agencies and organizations involved in safety and health in the Construction Industry. 5. Enhance compliance with the requirements of D.O. 13 as well as the relevant provisions of Occupational Safety and Health Standards. B. LEGAL BASES: a. Article 165, Chapter 2, Title I of Book IV of PD 442 otherwise known as the Labor Code of the Philippines, as amended provides that The Department of Labor and Employment shall be solely responsible for the administration and enforcement of occupational safety and health laws, regulations and standards in all establishments and workplaces wherever they may be located. b. Article 162, Chapter 2, Title I of Book Four of the Labor Code of the Philippines, provides that The Secretary of Labor and Employment shall by appropriate orders set and enforce mandatory occupational safety and health standards to eliminate or reduce occupational safety and health hazards in all work places and institute new and update existing programs to ensure safe and healthful working conditions in all places of employment. c. Department Order No. 13, series of 1998, Guidelines Governing Occupational Safety and Health in the Construction Industry. Page 1 of 36

8 d. Section 10, D.O. 13 Safety on Construction Heavy Equipment. e. Department Order No. 16, series of 2001 mandates that the Bureau of Working Conditions (BWC), either directly or through accredited training organizations shall conduct continuing programs to increase the supply and competence of personnel qualified to carry out the provisions of the Standards. f. Section 6.6.2, Department Order No. 19, series of 1993, mandates that the Department through the Regional Offices shall strictly enforce the Occupational Safety and Health Standards, as amended, particularly Rule 1005 on Duties of Employers, Workers and other persons and Rule 1410 on Construction Safety. Through the Bureau of Working Conditions (BWC), the Department may issue a code of practice on Occupational Safety and Health for the Construction Industry. g. Occupational Safety and Health Standards (OSHS), Otherwise known as the Implementing Guidelines of the Article 162 of the Labor Code of the Philippines. h. Article 128 and 129 of the Labor Code of the Philippines (LCP) on the visitorial and enforcement power of the Secretary of Labor and Employment or her duly authorized representatives, including the labor inspectors. i. D.O Guidelines on the implementation of the Labor Standards Enforcement Framework series of C. AGENCIES INVOLVED IN CONSTRUCTION HEALTH AND SAFETY LAWS AND REGULATIONS AND OTHER RELATED ISSUANCES : 1. Department of Labor and Employment a. Bureau of Working Conditions (BWC) Performs primarily policy formulation and program development and advisory functions in the administration and enforcement of laws relating to working conditions. Exercises technical supervision in the administration and enforcement of all Labor Standard laws, including health and safety in all establishments, workplaces and worksites. b. DOLE-Regional Offices Enforce laws, policies, plans programs, projects, rules and regulations of the Department on labor standards and working conditions and exercise the visitorial power through Labor Standards Enforcement Divisions (LSEDs), pursuant to Article 128 of the Labor Code, as amended.. Page 2 of 36

9 c. Employees Compensation Commission Initiates, rationalizes, and coordinates policies on employees compensation programs as well as deciding appealed cases from the Government Service Insurance System and Social Securities Services, the agencies which initially administer the employees compensation program. d. Occupational Safety and Health Center (OSHC) Plans, develops and implement training programs. Undertakes continuing studies and researches on OSH. Undertakes practical testing for standard specification for Personal Protective Equipment. Conducts work environment measurement and medical examination for the ready detection of occupational diseases. e. Technical Education Skills Development Authority (TESDA) Supervision in the development and implementation of the Skills and Equipment Standards Certification System. Issues the skills certification for critical construction occupation, pursuant to appropriate laws and issuances. 2. Department of Trade and Industry a. Construction Industry Authority of the Philippines (CIAP) Mandates to promote, accelerate and regulate the growth of the construction industry. Implements blacklisting proceedings pursuant to Section 5.2b.3 of the Revised Uniform Guidelines for Blacklisting Constructors Involved in Public Construction (Approved under CIAP Board Resolution No. 5, series of 2000) in cases of the failure of all the constructors to comply with D.O. 13, Labor standard laws including the Occupational Safety and Health Standards (OSHS).. b. Construction Manpower Development Foundation (CMDF) Serves as the manpower development board for Philippine construction and its allied industries. Undertakes training for skills development, safety awareness and other supervisory/managerial courses. Participates in the development of skills standards for the construction industry. c. Philippine Contractors Accreditation Board (PCAB) Page 3 of 36

10 The Board is vested with authority to issue, suspend and revoke licenses of contractors, investigate such violation of this act and the regulations there under as may come to each knowledge and, for this purpose, issue subpoena and subpoena duces tecum to secure appearance of witnesses in connection with the charges presented to the Board, and to discharge such other powers and duties affecting the Construction Industry in the Philippines. 3. Department of Health (DOH) - The Non-Communicable Diseases Control Office Responsible in the formulation and implementation of Chapter VII of The Code on Sanitation of the Philippines (P.D. No. 856), among others, which provides rules, and regulations on industrial hygiene and other sanitary requirements. 4. Department of Public Works and Highways (DPWH) - Office of the Building Official Responsible in the administration and enforcement of P.D (National Building Code and Its Implementing Rules and Regulation) including the imposition of penalties for administrative violations. 5. Department of Interior and Local Government (DILG) - Bureau of Fire Protection Responsible for the implementation of the provisions of Presidential Decree 1185 otherwise known as the Fire Code of the Philippines which provide standards, rules and regulations on fire safety, prevention, protection and control/suppression. 6. Department of Environment and Natural Resources(DENR) - Environmental Management Bureau (EMB) Responsible in the issuance of Environmental Compliance Certificate (ECC) prior to construction activities. 7. Construction Industry Tripartite Council(CITC) Advisory and oversight functions in the formulation and implementation of laws, policies and issuances pertaining to working conditions, health and safety in the construction industry. Page 4 of 36

11 D. DEFINITION OF TERMS: As used herein, the terms below shall be defined as follows : 1. Accredited organization refers to any organization duly accredited by the Department of Labor and Employment (DOLE) which is pursuant to Rule 1030, delegated or authorized to perform functions related to the improvement of occupational safety and health such as training, testing, certification, safety and health audit or any other similar activity. 2. Certified First-Aider refers to any person as defined in Rule 1960 of the Occupational Safety and Health Standards, trained and duly certified or qualified to administer first-aid by the Philippine National Red Cross or by any organization accredited by the same. 3. Construction project manager/consultant refers to any person or entity who is hired by the project owner, to act in the owner s behalf concerning the supervision and monitoring of all matters related to the overall execution of a construction project. The construction project manager shall be a separate entity from the general constructor or any subcontractor of the construction project. 4. Construction safety and health committee refers to the general safety and health committee for a construction project site that shall be the overall coordinator in implementing OSH programs. 5. Construction safety and health officer refers to safety personnel or any employee/worker trained and, in addition to their regular duties and responsibilities, tasked by his employer to implement occupational safety and health programs in accordance with the provisions of the Occupational Safety and Heath Standards (OSHS). 6. Constructor deemed synonymous with the term builder and refers to any person or organization who undertakes or offers to undertake or purports to have the capacity to undertake or submits a bid to, or does himself or through others, construct, alter, repair, add to, subtract from, improve, move, wreck or demolish any building, highway, road, railroad, excavation or other structure, project, development or improvement, or to do any part thereof, including the erection of scaffolding or other structures or works in connection therewith. The term constructor includes subcontractor and specialty contractor. 7. Emergency health provider refers to any person or organization who is certified or recognized by the Department of Health and who can provide the same or equivalent emergency health services as an emergency hospital, including emergency treatment of workers on site, emergency transport and care during Page 5 of 36

12 transport of injured workers to the nearest hospital, with adequate personnel, supplies and facilities for the complete immediate treatment of injuries or illnesses. 8. General constructor refers to a constructor who has general supervision over the constructors in the execution of the project and who directly receives instructions from the owner or construction project manager if one is appointed by the owner. 9. Occupational health personnel refers to a qualified first-aider, nurse, dentist, or physician, engaged by the employer to provide occupational health services in the establishment/undertaking. 10. Private Safety Organization deemed synonymous with the term consulting organization accredited pursuant to Rule 1030 of the Occupational Safety and health Standards. 11. Project manager refers to the overall technical personnel of the general contractor and/or the subcontractor in charge of the actual execution of a construction project. 12. Resident engineer refers a duly licensed engineer who shall be tasked to be present at the construction site at all times, whenever work is being undertaken, and shall have the responsibility of assuring the technical conformance of all designs, materials, processes, work procedures rendered for the execution of the construction project, including safety and health of all persons within the construction site. 13. Safety personnel refers to any person engaged by any constructor, trained, accredited by DOLE and tasked to provide occupational safety and health services for the workers/employees in any construction project. 14. Safety and Health Committee refers to a group tasked with the responsibility to monitor, inspect, and investigate all aspects of the construction project pertaining to health and safety of construction workers. 15. Safety organization refers to any organization recognized and accredited by the DOLE to conduct occupational safety and health training and/or safety and health audit. 16. Construction safety and health program refers to a set of detailed rule that shall cover the processes and practices utilized in a specific construction project site in conformity with the OSHS including the personnel responsible and the penalties for violations thereof. 17. General Labor Standards inspection including general occupational health and safety refers to inspection by authorized person/s of the work environment, including the location and operation of machinery other than those covered by Page 6 of 36

13 technical safety inspections, adequacy of work space, ventilation, lighting, conditions of work environment, handling, storage or work procedures, protection facilities. 18. Safety and health audit refers to a regular and critical examination of OSH management system in project sites, OSH programs and records conducted by authorized person in pursuance of Rule 1040, D.O. 13, s 1998 and D.O. 16, s Skills standards refers to the written specification of the minimum stock knowledge and skills a worker should possess to perform the functions identified in the job description of his occupation. 20. Technical safety inspection- refers to inspection for the purpose of safety determination of boilers, pressure vessels, internal combustion engine, electrical installation, elevators, hoisting equipment and other mechanical equipment. 21. Trade test refers to an instrument used to measure workers skills and knowledge based on the requirements of the skills as prepared and determined by TESDA in coordination with its accredited organization/s. 22. Tool box meeting or gang meeting refers to daily meeting among workers and their respective supervisors for the purpose of instructions, discussion and proper briefing on the planned work, the assessment of past work, the possibility or actual occurrence of accidents at the site, tips and suggestions on how to prevent possible accidents and other related matters. 23. Construction safety signage refers to any, but not limited to, emergency or danger sign, warning sign or safety instruction, of standard colors and sizes in accordance with the specifications for standard colors of signs for safety instructions. 24. Heavy equipment refers to any machine with engine or electric motor as prime mover used either for lifting, excavating, leveling drilling, compacting, transporting and breaking works in the construction site, such as but not limited to crane, bulldozer, backhoe, grader, road compactor, prime mover and trailer, with minimum operating weight and horsepower rating of 1,000 KG and 10 HP, respectively, that are subject to test based on the requirements of D.O. No Imminent danger refers to a condition or practice that could reasonably be expected to cause death or serious physical harm before abatement under the normal enforcement procedures can be accomplished. 26. Treatment Room refers to any enclosed area or room equipped with the necessary medical facilities and supplies, and located within the premises of the Page 7 of 36

14 establishment where workers maybe brought for examination and treatment of their injuries or illnesses in cases emergency. 27. Unguarded surface refers to any working surface above water or ground, temporary or permanent floor platform, scaffold construction or wherever workers are exposed to the possibility of falls hazardous to life or limb. E. COVERAGE This Procedural Guideline shall apply to: a. All public and private operation and undertakings in the construction industry and its subdivision, namely general building construction, general engineering construction and specialty trade construction, based on the classification code of the Philippine Construction Accreditation Board of the Construction Industry Authority of the Philippines (CIAP); b. Companies and entities involved in demolition works; and c. Those falling within the construction industry as may be determined by the Secretary of Labor and Employment and as provided for under D.O. 13 and the Occupational Safety and Health Standards. F. DEPARTMENT ORDER NO. 13, REQUIREMENTS, The following shall be the minimum requirements for the approval of a Construction Safety and Health Program (CSHP). 1. Construction Safety and Health Program pursuant to Section 5, D.O. 13, series of Company Safety and Health Policy. The following shall apply: A Company Safety Policy which shall serve as the general guiding principles in the implementation of safety and health on site duly signed by the highest company official or his duly authorized representative who has the over-all control of project execution and should include the contractor s general policy towards occupational safety, worker s welfare and health, and environment. A Safety policy, which shall include the commitment that the contractor shall comply with DOLE minimum safety requirements, including reporting requirements of the Occupational Health and Safety Standards (OSHS), and other relevant DOLE issuances. These may include, but are not limited to the following: Page 8 of 36

15 a. Registration (Rule 1020 and DO 18-02) b. Report of Safety Committee Organization (Rule 1040) c. Notification of Accidents and Occupational Illnesses (Rule 1050) d. Annual Work Accident/Illness Exposure Data Report (Rule 1050) e. Application for installation of mechanical/electrical equipment for construction of structure for industrial use (Rule 1070 and 1160) f. Annual Medical Report (Rule 1960) 1.2 Specific Construction Safety and Health Program shall contain the tendering agency s requirements in addition to the minimum requirements under the appropriate sections of D.O. No. 13 whenever deemed as applicable. 1.3 Composition of Construction Safety and Health Committee. A structure and membership of the construction safety and health committee which shall be consistent with the minimum requirements of Section 11 of D.O. 13, series of Safety and Health Personnel. The following shall apply: a. All appointed first-aiders shall be duly trained and certified by the Philippine National Red Cross and shall possess a Certificate of Basic First Aid Training Course (Standard) with a valid PNRC ID Card. b. All appointed Safety Officers shall have completed the 40-hour BWC prescribed safety and health course as required by Rule 1030 of the OSHS, as amended by D.O. 16. All full-time safety personnel shall be accredited by the BWC pursuant to D.O. 16. c. All physicians and nurses assigned at the project site shall have completed the Bureau prescribed course on occupational safety and health course, pursuant to Rule 1960 of the OSHS. 1.5 Specific duties and responsibilities of the Safety Officer. The following shall apply: a. Specific duties and responsibilities shall comply with the outlined duties and responsibilities in Rule 1047 of the OSHS; and b. Procedure on the required performance of the assigned duties and responsibilities of safety officers in the construction site. 1.6 Applicable In-plant Safety and Health Promotion and Continuing Information Dissemination. The following shall apply: a. Detailed information dissemination or advisories to the new employees prior to on-site assignment. e.g. conduct of safety orientation, company s health and safety policies, hazards related to the job safety measures, safe work procedures. Page 9 of 36

16 b. Detailed programs on continuing education such as trainings and seminars, if any, that shall be given to employees e.g. BOSH, refresher course, first aid training, refresher course toolbox meeting, construction safety training for site safety officers, 80-hour advance safety course prescribe. c. Arrangements for conveying information on safety and health IEC materials e.g. Posters/komics/flyers, safety signages, handbooks/manuals, bulletin boards d. Arrangements for setting up sub-committees on safety and health, where necessary. e. Schedule of safety related activities e.g. toolbox meeting, health and safety committee meeting 1.7 Accident and incident investigation, recording, and reporting. The following shall apply: a. All accidents or incidences shall be investigated and recorded. b. All work related accidents resulting to disabling injuries and dangerous occurrences as defined in OSH Standards (Rule 1050) shall be reported. c. Responsible or duly authorized officer for accident or incident investigation recording and reporting who are either the employer/owner/project manager/safety officer d. Accident Report shall contain the minimum information as required in DOLE/BWC/OHSD/IP-6. e. Shall notify the appropriate DOLE Regional within 24 hours in case of fatal accidents. An accident investigation shall be conducted by the Regional Office within forty eight (48) hours after receipt of initial report of the employer. 1.8 Provisions for the protection of the general public within the vicinity of the company premises during construction and demolition. The following shall apply: a. Measures in order to ensure the safety of the general public shall be pursuant to Rule 11 of the National Building Code-Implementing Rules and Regulations: Protection of Pedestrians During Construction or Demolition b. Appropriate provisions and rules of OSHS - Rule : Protection of the Public - Rule : Protection against collapse of Structure - Rule : Traffic Control - Rule 1413: Excavation - Rule 1417: Demolition Page 10 of 36

17 - Rule 1060: Premises of Establishments - D.O. 13, Section 9: Construction Safety Signs - Other relevant provisions of OSHS. 1.9 General safety within construction premises. The following shall apply: The provisions for danger signs, barricades, and safety instructions for workers, employees, public, and visitors such as, housekeeping; walkway surfaces; means of access i.e. stairs, ramps, floor openings, elevated walkways, runways and platforms; and, light Environmental Control (Rule 1070 of the Standards). The following shall apply: a. Monitoring and control of hazardous noise, vibration and air-borne contaminants such as gases, fumes, mists and vapors. b. Provisions to comply with minimum requirements for lighting, ventilation and air movement Guarding of hazardous machinery (Rule 1200 of the Standards). The following shall apply: a. Provisions for installation/design of built-in machine guards. b. Provisions for built-in safety in case of machine failure. c. Provisions for guarding of exposed walkways, access-ways, working platforms Provisions for and use of Personal Protective Equipment (PPE) - (Rule 1080 of the Standards). The following shall apply: a. Appropriate types and duly tested PPEs to be issued to workers after the required training on their use. b. Provisions for maintenance, inspection and replacement of PPEs. c. In all cases the basic PPE commonly required for all types of construction projects are hard hats, safety shoes and working gloves. Other PPEs shall be required depending on the type of work and hazards Handling of Hazardous Substances (Rule 1090 of the Standards). The following shall apply: Provision for identification, safe handling, storage, transport and disposal of hazardous substances and emergency procedure in accordance with Material Safety Data Sheet (MSDS) in cases of accidents. Page 11 of 36

18 1.14 General materials handling and storage procedures. (Rule 1150 of the Standards). The following shall apply: - Safe use of mechanical materials handling equipment - Secured and safe storage facilities - Regular housekeeping as necessary so as not to constitute and/or present hazards - Clearly marked clearance limits - Proper area guarding of storage facilities 1.15 Installation, use and dismantling of hoist and elevators.-rule Testing and Examination of Lifting Appliance, Rule 1220 Elevators and Related Equipment. The following shall apply: a. Provisions to ensure safe installation, use and dismantling of hoist and elevator; b. Periodic inspection of hoists and elevators Testing and inspection of electrical and mechanical facilities and equipment. The following Rules of the Occupational Safety and Health Standards shall apply: Rule Coverage a. Rule Boiler b. Rule Unfired Pressure Vessels c. Rule Electrical Safety d. Rule Elevators and Related Equipment e. Rule Construction Safety f. Rule Training and Examination of Lifting Appliance 1.17 Workers skills and certification. The following shall apply: a. Provisions to ensure that workers are qualified to perform the work safely. b. Provisions to ensure that only qualified operators are authorized to use and operate electrical and mechanical equipment Provisions for emergency transportation facilities for workers. The following shall apply: Rule of the Occupational Safety and Health Standards - Emergency Medical and Dental Services Page 12 of 36

19 1.19 Fire Protection Facilities and Equipment. The following rule shall apply: a. Fire protection facilities and equipment as required under Rule 1940 of the OSHS b. Proposed structure and membership of fire brigade c. Provision for training on emergency preparedness 1.20 First aid and health care medicines, equipment and facilities. a. Identification of the proposed first aid and health care facilities that the employer shall provide satisfying the minimum requirements of OSHS. b. Identification of the medical and health supplies, such as medicines and equipment to be provided. c. In all cases, the provision of first aid medicines and emergency treatment shall be mandatory. d. In the absence of the required on site health care facilities, the employer shall attach a copy of a written contract with a recognized emergency health provider as required under the OSHS Workers Welfare Facilities. The following shall apply: a. Provisions for toilet and sanitary facilities b. Proposed bathing, washing, facilities c. Proposed facilities for supplying food and eating meals d. Proposed facilities for supplying potable water for drinking and for washing e. Proposed facilities for locker rooms, storing and changing of clothes for workers Proposed Hours of Work and Rest and Rest Breaks. The following shall apply: a Work schedules, working hours, shifting schedules b. Frequency and length of meals and breaks c. Schedule of rest periods 1.23 Waste Disposal. The following shall apply: a. Proposed method of clearing and disposal of waste. b. Provisions for permits and clearance where require in disposal of hazardous wastes Disaster and Emergency Preparedness Contingency 1.25 Safety Program. The Safety Programs shall contain the following: a. Standard work procedures. Page 13 of 36

20 b. Job hazard analysis for the following activities as applicable to the project. c. Other hazardous work, not outline herein but will be performed during project execution must also be included. The activities may consist of any number of the following, depending on the nature of the project, vis-à-vis exposure to hazards: a. Site Clearing b. Excavations c. Erection and dismantling of scaffolds and other temporary working platforms d. Temporary electrical connections/installations e. Use of scaffolds and other temporary working platforms f. Working at unprotected elevated working platforms or surfaces g. Work over water h. Use of power tools and equipment i. Gas and electric welding and cutting operations j. Working in confined spaces k. Use of internal combustion engines l. Handling hazardous and/or toxic chemical substances m. Use of hand tools n. Working with pressurized equipment o. Working in hot or cold environments p. Handling, storage, usage and disposal of explosives q. Use of mechanized lifting appliances for movement of materials r. Use of construction heavy equipment s. Demolition The hazard analysis shall contain the following: a. Identification of possible hazards for a particular activity. b. Identification of any company permits or clearances needed prior to the performance of the activity together with the name of person/s who is authorized to issue such permit or clearance. c. Identification of the proposed improvement in work standard procedures that shall be followed during implementation of a particular activity. d. Company inspection procedures to ensure safety during the execution of a particular activity. e. Identification of emergency procedures in case of accidents or any untoward incident while performing a particular activity Company Penalties/Sanctions for Violation/s of the Provision/s of Safety and Health Program The appropriate penalties or sanctions for violation of company rules and regulations or those stipulated in the CHSP and the observance of due process. Page 14 of 36

21 2. Personal Protective Equipment by Type of Project 2.1 General Building Construction Project (GBC). The following classifications shall apply: Classification: Air Navigation Facilities, Power Transmission & Distribution, Building and Housing, Communication facilities, Sewerage, water treatment plants and Site/Land development. (For the required PPE see Annex PPE-I) 2.2 General Engineering Construction Project. The following classifications shall apply: Classifications: Roads and airports(horizontal structure), bridges, irrigation system, flood control and drainages, dams, tunneling, ports and harbor, water supply (For the required PPE see Annex PPE-I) 2.3 Specialty Construction Project. The following classifications shall apply: Classifications: Electrical work, mechanical work, plumbing and sanitary work, air conditioning or refrigeration, water proofing work, painting work, communication facilities, foundation or piling work, structural steel work, concrete pre-cast, elevator or escalator, well drilling work, navigational equipment and instrument installation, electromechanical work, metal roofing and siding installation, structural demolition and landscaping. (For the required PPE see Annex PPE-I) 3. Safety Personnel and Skilled Worker. The following shall apply: 3.1 Minimum Required Safety Personnel. The following shall apply: a. The General Constructor shall provide for a full time officer, who shall be assigned as the general construction safety and health officer to oversee full time the overall management of the Construction Safety and Health Program. b. The General Constructor shall provide for additional Construction Safety and Health Officer/s in accordance with the requirements for Safety Officer of Page 15 of 36

22 D.O. 16, s. 2001, depending of the total number of personnel assigned to the construction project site. c. The General Constructor shall provide for one (1) Construction Safety and Health Officer for every ten (10) units of heavy equipment assigned to the project site. d. Each construction contractors/subcontractors shall provide for the required number of safety officers in accordance with the requirements of D.O. 16 series Qualification and Training of Safety and Health Personnel and Skilled Workers. The following shall apply: a. Training of OSH Personnel shall be pursuant to D.O. 16 series of 2001 and its Procedural Guidelines. b. Worker Skills Certification for the critical operations/occupations shall be pursuant to D.O. 13 and D.O. 19 as well as the TESDA requirements on worker competency. 4. Construction Heavy Equipment. The following shall apply: 4.1 Accreditation of Organization for Testing of Construction Heavy Equipment shall be pursuant to D.O. No. 16 and its Implementing Guidelines and Procedural Guidelines on Accreditation and Performance Audit of Testing Organization for Construction Heavy Equipment. (Please see Annex B Checklist of Requirements for Accreditation of Testing Organization) 4.2 Conduct of Inspection and Test of Construction Heavy Equipment shall be pursuant to Sec. 10 of D.O. No. 13 and its Procedural Guidelines. The following shall apply: a. Procedural Guidelines on Accreditation and Performance Audit of Testing Organization for Construction Heavy Equipment b. Standard Checklist for Testing and Inspection of Construction Heavy Equipment. (See Annex CHE-I) c. Inspection Procedures for DOLE Inspectors 4.3 TESDA Certification Requirements for Operators. Certification for Operators shall be in accordance with the requirements of TESDA on worker competency Monitoring and Evaluation of CHE Test/Inspection conducted shall be pursuant to the Procedural Guidelines on Accreditation and Performance Audit of Testing Organization for Construction Heavy Equipment. Page 16 of 36

23 5. Signages and Barricades. The following shall apply: Construction Safety Signages shall be provided as a precaution and to advise the workers and the general public of the hazards existing in the worksite. 5.1 Signage Procedures: The signages shall be: a. Posted in prominent positions and at strategic locations. b. As far as practicable, be in the language understandable to most of the workers employed in the site. c. For non-raised floor areas, the attached yellow CAUTION sign shall be used when using yellow CAUTION tape. (See Table II of the OSHS) d. For non-raised floor areas, the attached red DANGER sign shall be used when using the red DANGER tape. (See Table II of the OSHS) e. Placed in designated areas at four (4) feet from ground level, if there are no other more practicable height placement. f. Regularly inspected and maintained in good condition to achieve its purpose. Signages that are damaged; illegible or that no longer apply as to purpose, site or language, shall be removed or be replaced by the safety officer when needed. g. Removed after the hazard is completely eliminated. If upon work completion the hazard is still present, the signage shall remain in place. h. Designed and constructed following the Overall Dimensions of Safety Signs Formula as required by the OSHS (see Table II, B page 178, OSHS) i. Specific with the type of hazard and should indicate the name of the contaminant/ substance involved (for chemical hazards), and the type of PPE or respiratory equipment to be worn. 5.2 Posting of Signages shall include, but not limited to the following places: a. Areas where there are risks of falling objects. b. Areas where there are risks of falling, slipping, tripping among workers and the public c. Prior to entry in project sites, locations and its perimeter. d. Where there is mandatory requirement on the usage of PPEs. e. Areas where explosives and flammable substances are used or stored f. Approaches to working areas where danger from toxic or irritant airborne contaminants/ substances may exist, g. All places where contact with or proximity to electrical facility/equipment can cause danger h. All places where workers may come in contact with dangerous moving Page 17 of 36

24 parts of machinery or equipment i. Locations of fire alarms and fire-fighting equipment j. Locations for instructions on the proper usage of specific construction equipment, tools. 5.3 Barricading Procedures: The following shall apply: a. The contractor shall provide all necessary barricades, safety tapes, safety cones or safety lines as required in isolating or protecting an unsafe work area from other workers, pedestrians or vehicular traffic. b. Barricades shall completely enclose the hazardous area and effectively limit unintentional or casual entry. c. Barricades shall be three (3) feet vertical height from the ground, when no other more practical height specification is available. d. Barricades shall be maintained in good condition to achieve its purpose. e. Barricades that are damaged; faded or that no longer apply as to purpose, site or meaning, shall be removed or shall be replaced by the safety officer. f. Barricade tape shall not be used on the floor as this presents a slipping hazard of its own. g. In addition to using the proper warning tape, the contractor shall use the appropriate safety signage when barricading an area. h. All barricades shall be removed after the hazard is completely eliminated. I. Upon work completion, if the hazard is still present, the barricade shall remain in place. 5.4 Installation of barricades shall include, but not limited to the following worksites conditions: a. hazardous areas b. trip hazard c. robotic movement d. energized electrical works e. overhead suspended load test f. critical high pressure test g. chemical introduction h. fall exposure i. Emergency Response Zone j. Unsafe condition zone k. Danger zone l. Confined and enclosed space Page 18 of 36

25 6. Construction Safety and Health Committee. The following shall apply: 6.1 Composition a. Project Manger or his representative as chairperson ex-officio b. General Construction Safety and Health Officer c. Construction Safety and Health Officers d. Safety representatives (SAFETY OFFICER) from each subcontractor. If DOLE s minimum requirements based on the number of workers of the contractor/sub-contractor requires only a part time safety officer, the safety officer need not be an accredited safety practitioner or consultant. e. Doctors, nurses and other health personnel pursuant to the requirements stated in Rule 1042 of the OSHS f. Workers representatives If there are no contractors/sub-contractors or the constructor is a subcontractor, the safety and health committee shall be in accordance with the requirements of Rule 1040 of the Occupational Safety and Health Standards. 6.2 Duties and responsibilities a. The Project Manager or his representative shall act as the Chairperson of the committee. b. The committee shall conduct safety meetings at least once a month. c. The persons constituting the Safety and Health Committee shall, as far as practicable, be at the construction site whenever construction work is being undertaken. d. The committee shall continually plan and develop accident prevention programs. e. The committee shall review reports of inspection, accident investigation and monitor implementation of the safety program. f. The committee shall provide necessary assistance to government authorities authorized to conduct inspection in the proper conduct of their activities g. The committee shall initiate and supervise safety trainings for its employees h. The committee shall conduct safety inspection at least once a month, and shall conduct investigation of work accidents and shall submit a regular report to DOLE. i. The committee shall initiate and supervise the conduct of daily brief safety meetings or toolbox meetings. Page 19 of 36

26 j. The committee shall prepare and submit to DOLE, reports on said committee meetings. k. The committee shall develop a disaster contingency plan and organize such emergency service units as may be necessary to handle disaster situations. 7. Construction Safety and Health Reports. The following shall apply: 7. 1 The Construction Safety and Health Report shall include: a. Monthly summary of all safety and health committee meetings b. Summary of all accident investigations /reports c. Corrective/Preventive measures/action for each hazard d. Periodic hazards assessment with corresponding remedial measures for new hazards e. Safety promotions and trainings conducted/attended 7.2 Submission of Reports. The following shall apply: a. All general constructors shall be required to submit a monthly construction safety and health report to the BWC copy furnished the DOLE Regional Office concerned. b. In case of any dangerous occurrence or major accident resulting in death or permanent total disability, the concerned employer shall notify the appropriate DOLE Regional Office within twenty-four (24) hours from occurrence. c. After the conduct of investigation by the concerned construction safety and health officer, the employer shall report all disabling injuries to the DOLE Regional Office on or before the 20th of the month following the date of occurrence of accident using the DOLE/BWC/HSD-IP-6 form. 8. Cost of Construction Safety and Health Program. The following shall apply: 8.1 The total cost of implementing a Construction Safety and Health Program shall be mandatory and shall be made an integral part of the project s construction cost as a separate pay item, duly quantified and reflected in the Project s Tender Documents and likewise reflected in the Project s Construction Contract Documents. 8.2 The cost of the following PPEs: helmet, eye goggles, safety shoes, working gloves, rain coats, dust mask, ear muffs, rubber boots, and other similar PPE s shall be indicated/enumerated per cost, per worker, foreman, leadman, jackhammer operator, carpenter, electrician, mason, steelman, painter, mechanic, Page 20 of 36

27 welder, plumber, heavy equipment operator, physician/inspector, and other such personnel. 8.3 The PPEs shall be sufficient in number for all workers particularly where simultaneous construction activities/operations in different areas are being undertaken. 8.4 The cost of the minimum required inventory of medicines, supplies and equipment as indicated in Table 47 of the OHS Standards shall be included. 8.5 The safety personnel manpower cost salaries/wages, benefits shall be included. 8.6 Cost of safety promotions/activities, training conducted and salaries of safety and health personnel, medical personnel employed or engaged by constructor. 9. Safety and Health Information. The following shall apply: 9.1 Workers shall be adequately and suitably: a. Informed of potential safety and health hazards to which they may be exposed at their workplace. b. Instructed and trained on the measures available for the prevention, control and protection against those hazards. 9.2 Every worker shall receive instruction and training regarding general safety and health common to construction sites which shall include, but not limited to the following: a. The basic rights and duties of the workers at the construction site. b. The means of access and egress, both during normal work and in emergency situations. c. The measures for good housekeeping. d. The location and proper use of welfare and first-aid facilities. e. The proper care and use of the items or personal protective equipments and protective clothing provided the workers. f. The general measures for personal hygiene and health protection. g. The fire precautions to be taken. h. The action to be taken in case of any emergency. I. The requirements of relevant health and safety rules and regulations. 9.3 The instruction, training and information materials provided shall be given in a language or dialect understood by the worker. Written, oral, visual and participative approaches shall be used to ensure that the worker has understood and assimilated the information. Page 21 of 36

28 9.4 Each supervisor or any person e.g. foreman, lead man, gangboss, and other similar personnel shall conduct daily tool box or similar meetings prior to the start of the operations for the day to discuss with the workers and to anticipate safety and health problems related. 9.5 No person shall be deployed in a construction site unless he has undergone a safety and health awareness seminar conducted by safety professionals or accredited organizations or other institutions recognized by DOLE. 9.6 Specialized instruction and training shall be provided to the following: a. Drivers and operators of lifting appliances, transport, earth-moving and materials-handling equipment and machinery; or any equipment of specialized or dangerous nature. b. Workers engaged in the erection or dismantling of scaffolds. c. Workers engaged in excavations at least one (1) meter deep or deep enough to cause danger, shafts, earthworks, underground works or tunnels. d. Workers handling explosives or engaged in blasting operations. e. Workers engaged in pile-driving. f. Workers in compressed air cofferdams and caissons. g. Workers engaged in the erection of prefabricated parts of steel structural frames and tall chimneys, and in concrete work, form work and other such type of work. h. Workers handling hazardous substances and materials. i. Workers as signalers and riggers. j. Other types of workers as may be categorized by TESDA 10. Welfare Facilities. The following shall apply: The employer shall provide the following welfare facilities in order to ensure humane working conditions: 10.1 Adequate supply of safe drinking water: a. If the water is used in common drinking areas, it shall be stored in closed containers from which the water is dispensed through taps or cocks. Such containers shall be cleaned and disinfected at regular intervals but not exceeding fifteen (15) days. b. Notices shall be posted conspicuously in locations where there is water supply that is not for drinking purposes Page 22 of 36

DEPARTMENT ORDER NO. 13 REQUIREMENTS CHECKLIST

DEPARTMENT ORDER NO. 13 REQUIREMENTS CHECKLIST Section 5. Construction Safety and Health Program Section 6. Personal Protective Equipment D. Section 7. Safety Personnel D. E. Does the project have a suitable

More information

CHAPTER 7 - OFFICE OF OCCUPATIONAL SAFETY AND HEALTH SUBCHAPTER 7A - GENERAL RULES AND OPERATIONAL PROCEDURES

CHAPTER 7 - OFFICE OF OCCUPATIONAL SAFETY AND HEALTH SUBCHAPTER 7A - GENERAL RULES AND OPERATIONAL PROCEDURES SECTION.0600 - SAFETY AND HEALTH PROGRAMS AND COMMITTEES 13 NCAC 07A.0601 PURPOSE AND SCOPE

More information

CONTRACTOR S MANAGEMENT PROCEDURE

CONTRACTOR S MANAGEMENT PROCEDURE S No Activity Responsibility 1 Pre-job meeting There shall be a pre-job meeting with contractor after award of contract in which following points shall be discussed and

More information

INTRODUCTION... 3. 1.0 Purpose... 4. 2.0 Policy... 4. Exception for Short-Term Workplace Visits... 4. Relevant Legislation and Regulations...

March 2006 INTRODUCTION... 3 1.0 Purpose... 4 2.0 Policy... 4 Exception for Short-Term Workplace Visits... 4 Relevant Legislation and Regulations... 5 Definitions... 5 Contractor Safety Coordination Overview...

More information

What the OHS Act says about the training responsibilities of constructors, employers, and supervisors

REQUIRED Pull-out chart TRAINING Construction Health and Safety in Ontario The Occupational Health and Safety Act (OHS Act) requires constructors and employers to provide worker training. Specific requirements

More information

SITE CONTRACTOR PROCEDURES

SITE CONTRACTOR PROCEDURES Asset Collection Type B Assets are considered High risk ; the site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment

More information

Vendor Management Program

The Corporation of the City of Kawartha Lakes is committed to the provision of a safe and healthy work environment for its employees, contractors and visitors. To promote this type of environment, the

More information

Contractor Health & Safety Guidelines

Contractor Health & Safety Guidelines 002 of 008 Contents 1.0 The Knight Frank Australia (KFA) Contractor Health and Safety Guidelines 3 2.0 Introduction 3 3.0 Contractor Health and Safety Management 3

More information

CONTRACTOR INDUCTION HANDBOOK

CONTRACTOR INDUCTION HANDBOOK POLICY The health and safety of all school employees and contractor employees is a vital concern at the school. Contract personnel will be treated in a manner consistent with

More information

Contractor Safety Management

Construction Safety And Health Book

1.0 Introduction Memorial University will ensure that a diligent contractor management process is established. This procedure establishes requirements for contract administration and oversight of contractor

More information

OSHA Training Guidelines (An Unofficial Summary)

OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety

More information

No. Name of Legislation Applicable Issues and Requirements Demonstration of Compliance 1. Health and Safety at Work Act 1974

The Police Treatment Centres Health and Safety Legal Compliance Register No. Name of Legislation Applicable Issues and Requirements Demonstration of Compliance 1. Health and Safety at Work Act 1974 2.

More information

Abu Dhabi Environment, Health and Safety Management System. AD EHSMS RF V2.0 of 2012

Abu Dhabi Environment, Health and Safety Management System AD EHSMS RF V2.0 of 2012 The AD EHSMS Concept The AD EHS Management System is an integrated management tool that covers the environmental, Safety

More information

Attachment D Subcontractor Safety, Health, and Environmental Minimum Performance Standards (MPS)

Attachment D Subcontractor Safety, Health, and Environmental Minimum Performance Standards (MPS) TABLE OF CONTENTS Introduction... Page 2 General Expectations... Page 2 Staffing Requirements and Expectations...

More information

WHS Contractor Management Procedure

Procedure Approved: 09/07/2013 Next Review: 09/07/2015 1. Overview The District council of Mount Remarkable Council is committed to engaging quality Contractors who have a sound understanding and commitment

More information

MANAGEMENT POLICY MANUAL MPM-10-91 CONTRACTOR SAFETY PROGRAM

POLICY MANUAL MPM-10-91 Name of Governing Policy: GMP-01-07, Employment Environment Principles Name of Policy: Policy Owner: MPM-10-91, Contractor Safety Program Manager, Health, Safety and Environment

More information

Guide Document for Development of WHS Management Plans

DISCLAIMER: THIS DOCUMENT IS PROVIDED AS GUIDANCE TO ASSIST CONTRACTORS IN MEETING THEIR OBLIGATIONS UNDER THE WHS LAW AND NTG CONTRACTS. NTG DOES NOT ACCEPT ANY RESPONSIBILITY FOR THE CONTENTS OF CONTRACTORS

More information

Occupational Health and Safety Management Framework Abu Dhabi An Overview of Requirements

Occupational Health and Safety Management Framework Abu Dhabi An Overview of Requirements John Ewing Chartered Health and Safety Professional Agenda OSHAD an Introduction AD EHSMS RF Brief overview of

More information

APPENDIX D: CONTRACTOR SAFETY PROGRAM CHECKLIST RFT CITY-WIDE BEAUTIFICATION LANDSCAPING MATERIALS & SERVICES

APPENDIX D: CONTRACTOR SAFETY PROGRAM CHECKLIST RFT9-2016 CITY-WIDE BEAUTIFICATION LANDSCAPING MATERIALS & SERVICES PART 1 (PART 1 TO BE COMPLETED BY CONTRACTOR) Contractor Representative: Number of Staff

More information

Occupational health and safety specification for construction works contracts

Occupational health and safety specification for construction works contracts 30 th November 2012 (Draft) Comment on this standard may be submitted by 08 February 2013 to: The Director-General National

More information

S/N MOM Accredited Courses Relevancy Reference

1 2 3 4 5 6 7 8 9 Safety Orientation (Tunnelling) for Workers Compressed Air Works (Man Lock Attendant) Compressed Air Works (Medical Lock Attendant) Building Construction Supervisors Safety Building Construction

More information

WHS Contractor Management Procedure

Wudinna District Council 1. Overview Wudinna District Council as part of its commitment under its Policy recognises its obligation to: Ensure, so far as is reasonably practicable, the health and safety

More information

Independent Contractor Policy

Independent Contractor Policy This Policy has been implemented to prevent accidents and personal injuries. It is not intended to be entirely inclusive. It is the responsibility of the Independent Contractor

More information

Occupational Health & Safety

CORPORATE SERVICES: Human Resources Division Subject: Contractor Safety Policy Policy/Guideline 25 (a) Occupational Health & Safety Issue Date: May 2009 Revision Date: October 2013 1. POLICY STATEMENT

More information

Division of Public Health Administrative Manual

PURPOSE To establish a protocol for the development of a written Division of Public Health Hazard Communications Program at each applicable office or laboratory workplace and to assure that employees are

More information

CHAPTER 150: BUILDING REGULATIONS. Adoption of Regulatory Codes by Reference

CHAPTER 150: BUILDING REGULATIONS Section Adoption of Regulatory Codes by Reference 150.01 Scope 150.02 Commercial Construction Code 150.03 Commercial Plumbing Code 150.04 Heating, Air Conditioning, Refrigeration

More information

WHS CONTRACTOR MANAGEMENT PROCEDURE

1. Overview The Port Augusta City Council as part of its commitment under its WHS Contractor Management policy, recognises its obligation to: Ensure, so far as is reasonably practicable, the health and

More information

Accident/Incident Investigation & Reporting Procedure

Accident/Incident Investigation & 1. Overview The recognises its obligation to ensure that all accidents and incidents are reported, recorded and investigated. We are committed to identifying corrective

More information

Section 2 Hazard Assessment and Risk Control Table of Contents

Section 2 Hazard Assessment and Risk Control Table of Contents 2.1 INTRODUCTION... 2 Class A Hazard... 3 Class B Hazard... 3 Class C Hazard... 3 Class D Hazard... 3 2.2 HAZARD ASSESSMENT... 4 2.2.1 Hazard

More information

CONTRACTOR SAFETY MANAGEMENT PROGRAM

CONTRACTOR SAFETY MANAGEMENT PROGRAM 16 th June 2010 TABLE OF CONTENTS 1.0 PURPOSE AND SCOPE 1.1 Intent 1.2 Scope 1.3 Program Elements 2.0 REGULATORY REQUIREMENTS 3.0 BACKGROUND AND GLOSSARY 3.1 Background

More information

EXHIBIT A SUBCONTRACTOR SAFETY, HEALTH, AND ENVIRONMENTAL MINIMUM PERFORMANCE STANDARDS (MPS)

EXHIBIT A SUBCONTRACTOR SAFETY, HEALTH, AND ENVIRONMENTAL MINIMUM PERFORMANCE STANDARDS (MPS) Panattoni Construction, Inc. ( Panattoni ) constantly strives to provide a safe and productive work environment.

More information

15 FAM 960 SAFETY, OCCUPATIONAL HEALTH, AND ENVIRONMENTAL MANAGEMENT (SHEM) PROGRAM REQUIREMENTS

15 FAM 960 SAFETY, OCCUPATIONAL HEALTH, AND ENVIRONMENTAL MANAGEMENT (SHEM) PROGRAM REQUIREMENTS (Office of Origin: OBO) 15 FAM 961 IMPLEMENTATION Each post abroad must implement a comprehensive safety

More information

WORKING IN CONFINED SPACES GUIDELINES

WORKING IN CONFINED SPACES GUIDELINES Contents 1 Introduction... 2 2 Scope... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Permit Authoriser... 3 4.2 Permit Receiver... 3 4.3 Responsible UOW Officer...

More information

1. GENERAL STATEMENT OF COMPANY HEALTH, SAFETY AND ENVIRONMENTAL POLICY

1. GENERAL STATEMENT OF COMPANY HEALTH, SAFETY AND ENVIRONMENTAL POLICY Dumfries Timber Co. Ltd. is committed to comply with our legal duties in order to provide a safe and healthy working environment

More information

CONTRACTOR ACCOUNTIBILITY TO SAFETY PROGRAM (CASP) Contents

CONTRACTOR ACCOUNTIBILITY TO SAFETY PROGRAM (CASP) Section: Hazard Control Date of Issue: 2008.01.09 Issued By: Environment, Health &Safety Part: Administrative Programs Revision #: 4 Revision Date: 2014.01.06

More information

OHS FORM 05: SAFE WORK METHOD STATEMENT (SWMS) also known as job safety analysis worksheet or scope of works

OHS FORM 0: (SWMS) also known as job safety analysis worksheet or scope of works This SWMS has been developed and authorised by: Company name: Name BRANDON LYON ABN: 8 13 184 708 Position DIRECTOR Date

More information

ENVIRONMENT, HEALTH & SAFETY

ORACLE ENVIRONMENT, HEALTH AND SAFETY: CONTRACTOR SAFETY PROGRAM Oracle has a comprehensive and structured approach to sourcing third-party companies and contractors ( contractors ) to perform a variety

More information

OSHA Compliance Checklist ASC

OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way

More information

Injury Prevention for the Construction Industry

Injury Prevention for the Workers in the construction industry encounter a variety of hazards, some of which can lead to serious injuries and fatalities. This fact sheet: Increases awareness of the primary

More information

Excavation & Trenching Procedure

Excavation & Trenching 1. Overview The will ensure, as far as is reasonably practicable, that the conduct of work relating to excavation and trenching will not be harmful to the health and safety of employees

More information

Originator Date Section ID Description of Change Reason for Change

MANAGEMENT PROCEDURE Author : P.D Govender Date of Recommendation: Date of Acceptance: Distribution: -Health & Safety Committee - All Personnel BREEDE VALLEY FIRE & EMERGENCY SERVICES DCN: BVFES/HSE/FSMA/SOP/IRP/2005

More information

Baseline Questionnaire

FEDERAL AGEC OCCUPATIOAL SAFET AD HEALTH PROGRAMS Baseline Questionnaire Instructions: Respond to each question below by circling ' or ' to indicate 'yes' or 'no.' An explanation is required for each

More information

C162 Asbestos Convention, 1986

C162 Asbestos Convention, 1986 Convention concerning Safety in the Use of Asbestos (Note: Date of coming into force: 16:06:1989.) Convention:C162 Place:Geneva Session of the Conference:72 Date of adoption:24:06:1986

More information

There is no water, surface tension cracks, nor other environmental conditions present that reduce the stability of the excavation.

Part 1926 Subpart P Introduction The Occupational Safety and Health Administration (OSHA) issued its first Excavation and Trenching Standard in 1971 to protect workers from excavation hazards. Since then,

More information

CONSTRUCTION SAFETY POLICY

California Institute of Technology CONSTRUCTION SAFETY POLICY Caltech Environment, Health, and Safety Office 1200 E. California Blvd., M/C 25-6 Pasadena, CA 91125 Phone: 626.395.6727 Fax: 626.577.6028

More information

West Virginia Website:

ARTICLE 11. WEST VIRGINIA CONTRACTOR LICENSING ACT 21-11-1. Short title. This article shall be known and may be cited as the ' Contractor Licensing Act'. 21-11-2. Policy declared. It is hereby declared

More information

WESTERN AUSTRALIA QUARRY MANAGER S CERTIFICATE OF COMPETENCY MINING LAW EXAMINATION

WESTERN AUSTRALIA QUARRY MANAGER S CERTIFICATE OF COMPETENCY MINING LAW EXAMINATION 2 October 2013 Time Allowed: Three (3) Hours Reading Time: 15 minutes Answers must be written in ink or ball point pen.

More information

SUBCONTRACTOR SAFETY PROGRAM

SUBCONTRACTOR SAFETY PROGRAM SUBCONTRACTOR SAFETY PROGRAM Page 1 SUBCONTRACTOR SAFETY PROGRAM TABLE OF CONTENTS PAGE NUMBER SUBCONTRACTOR SAFETY POLICY... 3 PURPOSE... 3 GUIDELINES FOR CONTRACTOR PRE-QUALIFICATION...

More information

SAFE WORK METHOD STATEMENT

Client: Site: 1. RESPONSIBILITIES SAFE WORK METHOD STATEMENT WORKING AT HEIGHT Prepared for Project No: Date Prepared: Y Contractors will conduct inductions for all workers (inclusive of employees and

More information

Contractor Safety Program Office of Environmental Health and Safety University of Toronto

Office of Environmental Health and Safety Table of Contents Overview... 3 Program Objectives... 3 University Health and Safety Policy... 4 Environmental, Health and Safety Mission Statement... 4 Roles

More information

Pre-Construction Safety Review - Outline & Minutes

Pre-Construction Safety Review - Outline & Minutes Project: Job No.: Attended By: Project Team Member Position Name Position PM (req d) Supt (req d) A project safety analysis meeting was held on. The purpose

More information

OCCUPATIONAL SAFETY AND HEALTH CENTER. #EngageMotivateAchieve Empowering Workers. Sustaining Enterprises.

OCCUPATIONAL SAFETY AND HEALTH CENTER #EngageMotivateAchieve Empowering Workers. Sustaining Enterprises. Training Programs Levels Training Course Duration Training Cost/Fees Venue Target Clients Core Basic

More information

Workshop Self Inspection Checklist WORK01

Workshop Self Inspection Checklist WORK01 General Mechanical Workshops Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides a basic framework

More information

PLEASE NOTE. For more information concerning the history of this Act, please see the Table of Public Acts.

PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this Act, current to December 2, 2015. It is intended for information and reference purposes only. This

More information

CONFINED SPACE PROCEDURE

Document uncontrolled when printed Procedure ID no 0460/05 CONFINED SPACE PROCEDURE This procedure is applicable to: All Department of Education and Children's Services employees. DOCUMENT CONTROL Managed

More information

OHS FORM 005 SAFE WORK METHOD STATEMENT (SWMS) also known as Job Safety Analysis (JSA)

OHS FORM 005 SAFE WORK METHOD STATEMENT (SWMS) also known as Job Safety Analysis (JSA) This SWMS has been developed and authorised by: Name: Company Name: ABN: Position: Signature: Date: Phone: Mobile:

More information

tips How smallchangescan saveyou big, &

warehousesafety tips How smallchangescan saveyou big preventaccidentsreduceinjuries, & increaseproductivity.. Table of Contents Welcome Statement...4 Safety Policy Statement...5 Guiding Principles...6

More information

1.0 Examples on common security provisions/common welfare provisions

1.0 Examples on common security provisions/common welfare provisions Demands for quality Who Period A. Traffic areas on the site 1. Access roads to the site For heavy traffic from the machinery Main contractor

More information

Sample Hazard Communications Program for Spray Polyurethane Foam Applications

Sample Hazard Communications Program for Spray Polyurethane Foam Applications Sample Hazard Communication Program for Spray Polyurethane Foam Applications Introduction This sample Hazard Communication

More information

AGC Safety & Loss Control Consultant:

Date: Company Name: Project Location: AGC Safety & Loss Control Consultant: Company Contact: Project Contact: The purpose of this checklist is to assist the Construction Safety PRIDE site auditor in identifying

Dole Construction Safety And Health Program Sample Pdf

More information

Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool

Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool This WHS Auditing System Tool is to be used as a self-assessment of YOUR COMPANY compliance with AS 4801 and the Work Health and Safety Act

More information

PITTSBURG TANK AND TOWER CO., INC.

PITTSBURG TANK AND TOWER CO., INC. HEALTH, SAFETY & ENVIROMENTAL PROGRAM INDEX 1.SAFETY POLICY & MANAGEMENT RESPONSIBILITIES - Safety Policy - Administrative Duties * Top Management * Safety Director *

More information

SECTION THREE CONSTRUCTION CODES

SECTION THREE CONSTRUCTION CODES CHAPTER 36: Construction Codes in Michigan Purpose and Applicability of Regulations Manufacturing facilities and other businesses must be designed according to code in

More information

This procedure applies to all DECS employees, students and others in worksites, schools, preschools and departmental offices. 1.0 PURPOSE...

OCCUPATIONAL HEALTH SAFETY AND WELFARE INJURY / INCIDENT REPORTING and INVESTIGATION PROCEDURE SCOPE This procedure applies to all DECS employees, students and others in worksites, schools, preschools

More information

HEALTH AND SAFETY SIGNS

R & R IDENTIFICATION HEALTH AND SAFETY SIGNS ARE MADE OF FIBERGLASS, ALUMINUM, SEMI-RIGID PLASTIC, AND PRESSURE SENSITIVE VINYL, ALL TO MEET OSHA SPECIFICATION. THE USE OF SAFETY SIGNS IS TO INDICATE AND

More information

School Science Lab Safety Guidelines

School Science Lab Safety Guidelines Occupational Safety & Health Bureau Montana Department of Labor & Industry Prepared for Montana Employers by the Occupational Safety & Health Bureau Department of Labor

More information

SPECIFIC SAFETY OBLIGATIONS FOR CONTRACTORS ENGAGED WITH THE CITY OF BUNBURY.

SPECIFIC SAFETY OBLIGATIONS FOR CONTRACTORS ENGAGED WITH THE CITY OF BUNBURY. The City of Bunbury acknowledges that it has a Duty of Care obligation under the Occupational Safety and Health Act 1984 (Section

More information

Elements of an Occupational Health and Safety Program

Occupational Health and Safety Division Elements of an Occupational Health and Safety Program Table of Contents Introduction 3 What workplaces must have a program? 5 What criteria must the program meet?

More information

Explanatory Notes on Accident/Incident Reporting for Construction Sites These notes are to be read in conjunction with the Flow Chart at Annex 2.

Explanatory Notes on Accident/Incident Reporting for Construction Sites These notes are to be read in conjunction with the Flow Chart at Annex 2. (0) Introduction 0.1 The explanatory notes outline the

More information

SAFE WORK PROCEDURE SWP 015 WORKING AT HEIGHT SEPTEMBER 2013 DOC. NO. D13/248399

Operation Brief Description of Activity Limitations MORELAND CITY COUNCIL Operations Centre 7-9 Walter Street Hadfield Vic 3046 Tel: 8311 4300 Working at height Approved by the Walter Street OHS committee

More information

Six steps to Occupational Health and Safety

Six steps to Occupational Health and Safety This booklet gives basic guidelines for workplace health and safety systems to help industry in NSW comply with the 'duty of care' principle outlined in the

More information

Demolition Program Checklist

Apollo General Insurance Agency, Inc. License Number 0606980 Demolition Program Checklist Information Needed: 5 years currently valued loss runs Narrative on any Losses in Excess of $10,000 Completed questionnaire,

More information

Safe Work Method Statement

Safe Work Method Statement Disclaimer: Use of Master Builders Generic Safe Work Method Statements The Master Builders Association of Victoria expressly disclaim all and any liability to any person in respect

More information

GEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT

PURPOSE To protect the health and welfare of GEORGIA TECH employees in areas where there may be a risk of injury or exposure to hazardous substances or conditions employees who work in areas where physical

More information

Health and Safety at Work (General Risk and Workplace Management) Regulations 2016

2016/13 Workplace Management) Regulations 2016 Jerry Mateparae, Governor-General Order in Council At Wellington this 15th day of February 2016 Present: His Excellency the Governor-General in Council These

More information

Safety Systems Review Facilities Management Guidance and specification Version 1 2014

Safety Systems Review Facilities Management Guidance and specification Version 1 2014 Membership Training Qualifications Audit and Consultancy Policy and Opinion Awards Contents Page Safety Systems Review

More information

HEALTH AND SAFETY POLICY AND PROCEDURES

HEALTH AND SAFETY POLICY AND PROCEDURES 1 Introduction 1. The Health and Safety at Work etc. Act 1974 places a legal duty on the University to prepare and revise as often as may be appropriate, a written

More information

Revised Scheme of Service for Occupational Health and Safety Personnel

REPUBLIC OF KENYA Revised Scheme of Service for Personnel February, 2007 ISSUED BY THE PERMANENT SECRETARY, MINISTRY OF STATE FOR PUBLIC SERVICE OFFICE OF THE PRESIDENT NAIROBI REVISED SCHEME OF SERVICE

More information

OH&S Management Systems Audit Checklist (NAT, E3)

3.1.2 3.1.1 Introduction OH&S Management Systems Audit Checklist (NAT, E3) This audit checklist is based on Element 3 (Implementation) of the National Self-Insurers OHS Audit Tool. For a full copy of the

More information

CLASSIFICATION SERIES: Mine Safety Inspector MAJOR AGENCIES: Natural Resources

STATE OF OHIO (DAS) CLASSIFICATION SPECIFICATION CLASSIFICATION SERIES: Mine Safety Inspector MAJOR AGENCIES: Natural Resources SERIES NO.: 2471 02/26/2012 SERIES PURPOSE: The purpose of the mine safety

More information

RMM # 111 Title: Contracting Work Safety / Due Diligence Program

Page:2 of 16 procedures, emergency response plans, incident reporting procedures, and the names and contact numbers of the job site safety supervisor (s). 4.3 Safety Management Plan (SMP) a written plan

More information

NEW JERSEY ADMINISTRATIVE CODE Copyright 2015 by the New Jersey Office of Administrative Law

5:23-5.1 Title; scope; intent NEW JERSEY ADMINISTRATIVE CODE (a) This subchapter of the regulations adopted pursuant to authority of the Uniform Construction Code Act, entitled 'Licensing of Code Enforcement

More information

H-0123 Contractor Safety Program

H-0123 Contractor Safety Program SUBJECT: Contractor Safety H-0123 REVISION NO: 4 REFERENCES: 29 CFR190 29CFR1926 CP-04-201 Contract Labor CP-04-215 Contract Services CP-28-111 Badging P&P 40-19 CP-04-107

More information

CONTRACTOR SAFETY MANAGEMENT PROCEDURE

CONTRACTOR SAFETY MANAGEMENT PROCEDURE Version 1.0 TRIM file number Short description Relevant to Authority Responsible officer Responsible office Date introduced July 20, 2015 Date(s) modified June 11,

More information

Policy Number: 054 Work Health and Safety July 2015

Policy Number: 054 Work Health and Safety July 2015 TRIM Ref: TD14/318 Policy Details 1. Owner Manager, Business Operations 2. Compliance is required by Staff, contractors and volunteers 3. Approved by

More information

Excavation, Penetration and Demolition Procedure

Related Policy Work Health and Safety Policy Responsible Officer Executive Director, Commercial Services and Development Approved by Executive Director, Commercial Services and Development Approved and

More information

A California Coalition for Worker Occupational Safety & Health Protection WORKSAFE! FACT SHEET

WORKSAFE! A California Coalition for Worker Occupational Safety & Health Protection WORKSAFE! FACT SHEET ADDENDUM to 8 CCR 3203 IIPP JOINT LABOR-MANAGEMENT SAFETY & HEALTH COMMITTEES LABOR-MANAGEMENT or

More information

Contractor Environment, Health and Safety Management Plan

EHSMS10 Contractor and Supplier EHS Management Contractor Environment, Health and Safety Management Plan Purpose Guidelines Record Keeping This template provides an example to Santos Contractors of the

More information

WORKPLACE SAFETY. Table 1: Industries with highest fatalities rates and types of highest fatal* / non fatal^ injuries

INTERISK ASIA PTE LTD. July 2011 WORKPLACE SAFETY Do you know that the workplace safety is part of everyone s responsibility? And so how many of us are assessing workplace safety naturally like it is part

More information

AUSTRALIA POST WORK HEALTH AND SAFETY STANDARDS FOR MAIL AND PARCEL CONTRACTORS

Introduction AUSTRALIA POST WORK HEALTH AND SAFETY STANDARDS FOR MAIL AND PARCEL CONTRACTORS Australia Post contractors have duties under work health and safety legislation to ensure their own health and

More information

RESPONSIBILITIES FOR SAFETY AND HEALTH

RESPONSIBILITIES FOR SAFETY AND HEALTH The ultimate responsibility for safety and health programs in the Louisiana Delta Community College lies with the faculty and staff. They are key persons for the

More information

2.1 For the purpose of these guidelines, the following terms or words or phrases shall mean or be understood as follows:

CIAP GUIDELINES TO DETERMINE FILIPINO CAPABILITY IN UNDERTAKING SPECIFIC REQUIREMENTS FOR CONSULTING SERVICES AND/OR CONSTRUCTION OF INFRASTRUCTURE PROJECTS Section 1. Purpose and General Coverage 1.1

More information

TABLE OF CONTENTS 4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 --MANAGEMENT STATEMENT

4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 TABLE OF CONTENTS --MANAGEMENT STATEMENT ADMINISTRATIVE 1. SHE AND ACCIDENT PREVENTION 1-A Discipline 2. NEW HIRE ORIENTATION (Outline) 2-A New Hire Orientation

More information

Safety and Health Office WORKPLACE SAFETY CHECKLIST

Location: Date: Inspected by: Safety and Health Office WORKPLACE SAFETY CHECKLIST WORK ENVIRONMENT Ventilation Removal of fumes and dust Temperature and humidity control Noise levels Vibration Lighting

More information

WHS CONTRACTOR MANAGEMENT PROCEDURE

WHS CONTRACTOR MANAGEMENT PROCEDURE Version No: Issued 3.0 18/11/2013 15/11/2018 1. Overview The District Council of Peterborough as part of its commitment under its WHS Contractor Management policy, recognises

More information

4.05e WHS Guidelines for Incident Investigation Procedures Page 1 of 7

Page 1 of 7 1 Purpose It is a legal requirement under the NSW Work Health and Safety Act 2011 and NSW Work Health and Safety Regulation 2011 to identify hazards, assess the risk of those hazards, implement

More information

Work Health and Safety Regulation Explanatory notes for SL 2011 No. xx. made under the Work Health and Safety Act 2011

Work Health and Safety Regulation 2011 Explanatory notes for SL 2011 No. xx made under the Work Health and Safety Act 2011 General outline Short title Work Health and Safety Regulation 2011. Authorising

More information

Explanatory Notes on Accident/Incident Reporting for Construction Sites These notes are to be read in conjunction with the Flow Chart at Annex 2.

Explanatory Notes on Accident/Incident Reporting for Construction Sites These notes are to be read in conjunction with the Flow Chart at Annex 2. (0) Introduction 0.1 The explanatory notes outline the

More information

Occupational Health and Safety Liability for Contractors

October 23, 2013 Occupational Health and Safety Liability for Contractors Association of Corporate Counsel - Ontario Chapter Program Heenan Blaikie LLP 100 King St. W, 53rd Floor Toronto, ON The Current

More information

WHS Policies and Procedures Package

WHS Policies and Procedures Package The following is an extract to highlight the style and layout of this publication, as well as a snapshot of the content. Some samples may not be included in their entirety

More information